Lascaux Medium 2 Matt 30 ml Made In Switzerland

Applications
Mix with Lascaux Acrylics to create glazes in various sheens mix with paints to increase transparency while extending volume use in collage for gluing lightweight materialscolours can be mixed into the medium to slow down drying time may be used alone as colourless sizing or primer for canvas and paper

Directions
For glazing, the Lascaux acrylic colours are either thinned with water or mixed with Lascaux mediums. Diluted only with water, they can be used like watercolours; however, strong dilution lowers the binder concentration and reduces the brilliance of the colours.

To maintain the original binder and brilliance level, the dilution should be made with Lascaux Medium (e.g. Medium diluted 1:1 with water).All Lascaux Mediums can be mixed together. The choice depends on the degree of gloss desired. Medium 2 matt and Medium 3 satin matt can be adjusted with Medium 1 gloss to achieve specific results.

Composition
Pure acrylic resin emulsion.

Brand

Lascaux

Acrylic Medium for mixing and diluting paint and as final varnsih.
Water Thinnable
Lascaux acrylic mediums increase the transparency of the colours and strengthen binder content.
To improve film strength and adhesion of strongly diluted colours
Dries to a waterproof matt film
Modifies the gloss of Lascaux acrylic colours
Due to its relatively large particle size, this medium
is not suitable as a colourless matt varnish: the
coarse-grained dry surface is not scratch-resistant,
and the colour appears duller.
Ideal for glazes on concrete (pur or diluted with up
to max. 10% water) and can be tinted with acrylic
colours as desired (approx. 5-10%).
May be used alone as colourless sizing or primer
for canvas and paper